3x Cargo Track/Rails + 6x Tie-down loops - Narrow Type side vent You'll also need to seal/glue

You'll also need to seal/glue the lens back onto this base when complete

Looking at the design of these it would seem that you need to remove the front bumper completely to fit these lights

These replacement assemblies each have 3 bright LEDs

This is the later style touch switch pack that is fitted to the Evoque from 2021-onwards

This is much easier and cheaper option than buying a genuine part from Land Rover and drilling your roof and removing your headlining to fit one to your car

3x Cargo Track/Rails + 6x Tie-down loops - Narrow Type side vent You'll also need to seal/glue3x Cargo Track Rails (Narrow Type 30mm width) Universal Fit + 6x Locking Tie down Loops These useful cargo tracks can be used to help retain the cargo in your vehicle. Often you may not have enough cargo to fill the rear of your pickup and then you have the problem that as you drive your cargo decides to try and destroy itself by bouncing off the sides of your rear load area. This problem is made worse if you have a plastic load liner that seems to