Internal Truck Assembly - Aluminum Slide Gate Caps 50 - 10406 - 2-1/2"

50 - 10406 - 2-1/2" Galvanized Tension Bands

This fork latch is used on an ornamental iron fence

A 5” neptune cap is installed on every 5” x 5” vinyl fence post

Expansion Springs are used inside of top rail sleeves

This combination of material and surfacing means superior rust resistance

Internal Truck Assembly - Aluminum Slide Gate Caps 50 - 10406 - 2-1/2"Swivel type, zinc die coated steel, with 6 sealed lubricant ball bearing rollers, 2 inches (50 mm) in diameter by 9 16" (14 mm) in width, and 2 side rolling wheels to ensure truck alignment in track. Mount trucks on post brackets using 7 8" (22 mm) diameter ball bolts with 5 8" (16 mm) or 1 2" shank Truck should slide freely down track while not under a load. Once installed, gate should open freely without drag or resistance. Truck assembly shall